ITB – EM/EGY Procurement of Laboratory Supplies for Egypt (Restricted to Local Egyptian Suppliers)
WHO
ITB – EM/EGY Procurement of Laboratory Supplies for Egypt (Restricted to Local Egyptian Suppliers)
Invitation to bid
Reference:
EM/ACO/EGY/P/0009588
Beneficiary countries or territories:
Egypt
Published on:
06-Oct-2026
Deadline on:
27-Oct-2026 23:00 (GMT 3.00)
Description
This bidding is Restricted to Local Egyptian Suppliers.
INVITATION TO SUBMIT A BID (ITB) FROM THE WORLD HEALTH ORGANIZATION
BIDS must be submitted via the e-tendering portal (https://ungm.in-tend.co.uk/who)
CLOSING DATE: 27 October 2026 at [23:00] hours (Cairo time).
OFFERS SUBMITTED IN ANY OTHER MANNER (e.g. fax, email) WILL BE INVALIDATED
As part of its work, the World Health Organization undertakes jointly with Member States and other specialized UN Agencies a variety of health projects for which equipment and supplies are provided free of charge by the Organization. Purchases of such material are non-commercial and international in character, as the products in question are for use in health programmes mainly in developing countries or in the offices of the Organization itself.
The purpose of this Invitation to Bid (ITB) is to procure [products] for [destination].
DESCRIPTION:
Bidders are invited to submit offers for [products] for [destination] under procurement , as per details provided in Annex I.
INSTRUCTIONS TO PROPOSERS:
1. Prices must be on DAP.
2. The currency of the offer shall preferably be the US Dollar, but any other United Nations convertible currency will be acceptable.
SUBMISSION METHOD:
Offers must be made in accordance with the instructions contained in this ITB. All offers must be submitted via the e-tendering portal https://ungm.in-tend.co.uk/who.
All technical specifications and full documentation must be submitted by the same means. Offers submitted by other methods shall not be considered.
VALIDITY OF OFFERS:
Offers should be valid for a period of no less than 90 days and preferably for a period as long as possible. WHO reserves the right to place similar orders for other destinations at a later stage within the validity period subject to acceptance by the supplier.
SAMPLES:
WHO may request free samples, which will be subject to technical review and laboratory analysis where appropriate.
REQUESTING INFORMATION FROM WHO DURING THE TENDER PROCESS:
Any request for information regarding the specifications or other details of this ITB are to be addressed to the procurement officer in charge EXCLUSIVELY though the e-tendering portal.
Enquiries received less than seven (7) calendar days prior to the ITB closing date cannot be guaranteed any response. Only written enquiries will be entertained. Questions are to be submitted in the format "Paragraph Number - Question". A response to written queries will be provided to all proposers in writing.
TERMS AND CONDITIONS:
Any order resulting from this invitation shall contain the WHO Purchase Order General Terms and Conditions and any other specific terms or conditions detailed within this ITB.
ADDITIONAL INFORMATION:
Any information that the vendor may consider necessary to guarantee or clarify the bid (e.g. technical details, compliance with standards, etc.) may be included, provided appropriate and clearly indicated reference is made in the offer.
RIGHTS OF WHO:
In case of failure by the vendor to perform under the terms and conditions of the purchase order, including, but not limited to, failure to obtain necessary export licences, or to make delivery of all or part of the goods by the agreed delivery date or dates, WHO may, after giving the vendor reasonable notice to perform and without prejudice to any other rights or remedies, exercise one or more of the following rights:
1. procure all or part of the goods from other sources, in which event WHO may hold the vendor responsible for any excess cost occasioned thereby,
2. refuse to accept delivery of all or part of the goods,
3. terminate the purchase order.
AWARD:
WHO reserves the right to:
1. Award the contract to a bidder of its choice, even if its bid is not the lowest;
2. Award separate contracts and make multiple arrangements for any item or items, where, in the opinion of WHO the lowest acceptable offer cannot fully meet the requirements, or if it is deemed to be in the interest of WHO to do so. Any arrangement under this condition will be made on the basis of quoted price in lowest, second lowest and third lowest acceptable offer which is fully responsive and meeting all requirements. WHO reserves the right also to accept only part of the items and/or quantities quoted for;
3. Accept or reject any bid, and to annul the solicitation process and reject all bids at any time prior to award of contract, without thereby incurring any liability to the affected bidder or bidders and without any obligation to inform the affected bidder or bidders of the grounds for WHO`s action;
4. Award the contract on the basis of the Organization’s particular objectives to a bidder whose bid is considered to be the most responsive to the needs of the Organization and the activity concerned;
5. Not award any contract at all;
6. Reject any item or offer which is not in compliance with the specifications and requirements set forth in this Invitation to Bid. Moreover, WHO may reject any or all bids without assigning any reason in the interest of the Organization.
WHO has the right to eliminate bids for technical or other reasons throughout the evaluation/selection process. WHO shall not in any way be obliged to reveal, or discuss with any bidder, how a bid was assessed, or to provide any other information relative to the evaluation/selection process or to state the reasons for elimination to any bidder.
NOTE: WHO is acting in good faith by issuing this ITB. However, this document does not oblige WHO to contract for the performance of any work, nor for the supply of any products or services.
BIDDER`S UNDERTAKING:
The bidder shall inform WHO immediately about any serious quality and/or safety concerns related to the manufacture, control or use of their product, including suspension or cancellation of marketing authorizations. This applies to pre contract award, as well as post contract award periods.
The bidder, if awarded the contract, pledges to work with WHO to minimize potential public health risks by actively organizing product recalls of defective products and either in replacing the defective product or covering the direct and related costs related to replacing the defective product within defined timelines as specified in the contractual requirements.
emacoegyprocurement@who.int
41102404
-
Laboratory heaters
41103701
-
Circulating baths
41103702
-
Thermostatic baths
41103703
-
Multiple baths
41103704
-
Biological baths
41103705
-
Organ baths
41103706
-
Water baths
41103707
-
Oil baths
41103708
-
Sand baths
41103709
-
Refrigerated baths
41103710
-
Orbital shaking water baths
41103711
-
Reciprocating shaking water baths
41103712
-
Immersion circulators
41103713
-
Viscosity baths
41103714
-
Tissue flotation baths
41103715
-
Laboratory bath accessories or supplies
41103716
-
Blood bank plasma thawing bath
41103717
-
Tissue culture bath
41103718
-
Histology tissue freezing bath
41104909
-
Laboratory filter holders or cyclones
41104911
-
Laboratory air filtration systems
41111502
-
Laboratory balances
41116164
-
Test kit or probe for laboratory proficiency assessment or laboratory performance improvement tracking
41116206
-
Diagnostic beverages for laboratory testing
41121801
-
Laboratory watch glasses
41121802
-
Laboratory stirring rods
41121803
-
Laboratory beakers
41121804
-
Laboratory flasks
41121805
-
Laboratory graduated cylinders
41121806
-
Laboratory vials
41121807
-
Laboratory ampoules
41121808
-
Laboratory burets
41121809
-
Laboratory funnels
41121810
-
Laboratory staining dishes or jars
41121811
-
Laboratory microchemistry kits
41121812
-
Laboratory dishes
41121813
-
Cuvettes
41121814
-
Laboratory lids or covers or coverslips
41121815
-
Laboratory adapters or connectors or fittings
41121816
-
Laboratory glass tube
41121817
-
Glass bell jar
41121818
-
Laboratory storage bottle
41121819
-
Laboratory dropper bottle and dropper cap
41121820
-
Laboratory carboy or spout
41121821
-
Vial closure cap or seal or stopper