Supply and Delivery of Laminate Fargo 82605-002, Custom PolyGuard Overlaminate, 1.0mil, Compatible with HDP5000, HDO5600, HDO8500, DTC150, DTC4500 and DTC4500e Printers, 250 prints per roll, on the basis DAP - MONUSCO Logistics Support Base, Entebbe, Ugand

The United Nations Mission in South Sudan (UNMISS) has a requirement for the Supply and Delivery of Laminate Fargo 82605-002, Custom PolyGuard Overlaminate, 1.0mil, Compatible with HDP5000, HDO5600, HDO8500, DTC150, DTC4500 and DTC4500e Printers, 250 prints per roll, on the basis DAP - MONUSCO Logistics Support Base, Entebbe, Uganda (Incoterms 2020) Specific Requirements/Information Interested companies are invited to submit their EOIs for consideration by email (preferred), courier or by hand delivery as indicated below. The EOI must include, at a minimum, the following documentation/information: (a) United Nations Global Market Place (UNGM) Registration: Company should be registered in UN Global Marketplace (UNGM) or should start their registration process immediately if not registered using the link https://www.ungm.org. Companies registered at the basic level are strongly advised to upgrade to level 1. (b) Company’s contact details: UNGM Identification Number, company name, address, telephone and e-mail must be provided in the EOI Form. Failure to provide this information in the EOI Form may result in a rejection of an EOI. (c) Vendors must be registered in UNGM under the services (UNSPSC No. 44101700 & 78101500) in order to participate in the solicitation for this requirement. Important Notice: 5. This REOI does not constitute a solicitation. UNMISS reserves the right to change or cancel the requirement at any time during the EOI or solicitation process. Thus, submitting a response to this REOI does not automatically guarantee that your company will be considered for receipt of the solicitation when issued. 6. UNMISS also reserves the right to send the Solicitation Documents to companies who were identified through additional market research or other means to source the UN requirements 7. The UNGM Identification Number obtained at the start of the registration process, must be provided to the Procurement officer at the time of submitting the EOI in the completed EOI Form. 8. The “EOI Form” is available in “Business Opportunities” Section of www.ungm.org website. Vendors are strongly encouraged to submit their EOIs through the E-mail addresses provided below. 9. The REOI, clearly marked “Request for Expression of Interest for Supply and Delivery of Laminate Fargo 82605-002, Custom PolyGuard Overlaminate, 1.0mil, Compatible with HDP5000, HDO5600, HDO8500, DTC150, DTC4500 and DTC4500e Printers, 250 prints per roll, on the basis DAP - MONUSCO Logistics Support Base, Entebbe, Uganda (Incoterms 2020) "must be received by UNMISS no later than 16:00 Hours (GMT+2) on Monday, 5 October 2026, via the link https:/ungm.org/Public/Notice or contact cecilia.sessiodametey1@un.org; kibukamusoke@un.org; boy@un.org; and kitengeaziza@un.org or in case of difficulties. The EOI may also be hand delivered to the attention of the Chief Procurement Officer, United Nations Mission in South Sudan (UNMISS) Near Juba International Airport, Room No.: 3D/01, Juba, South Sudan.