Supply and Delivery of Mechanical Tools for Mombasa Industrial Training Centre (MITC) – National Industrial Training Authority (NITA), Kenya
UNOPS
Supply and Delivery of Mechanical Tools for Mombasa Industrial Training Centre (MITC) – National Industrial Training Authority (NITA), Kenya
Request for quotation
Reference:
RFQ/2018/5095
Beneficiary countries or territories:
Kenya
Registration level:
Basic
Published on:
03-Jul-2018
Deadline on:
24-Jul-2018 09:00 0.00
Description
Tender description: Supply and Installation of Mechanical Tools for Mombasa Industrial Training Centre (MITC) – National Industrial Training Authority (NITA), Kenya.
-----
IMPORTANT NOTE: Interested vendors must respond to this tender using the UNOPS eSourcing system, via the UNGM portal. In order to access the full UNOPS tender details, request clarifications on the tender, and submit a vendor response to a tender using the system, vendors need to be registered as a UNOPS vendor at the UNGM portal and be logged into UNGM. For guidance on how to register on UNGM and submit responses to UNOPS tenders in the UNOPS eSourcing system, please refer to the user guide and other resources available at: https://esourcing.unops.org/#/Help/Guides
-----
IMPORTANT NOTE: Interested vendors must respond to this tender using the UNOPS eSourcing system, via the UNGM portal. In order to access the full UNOPS tender details, request clarifications on the tender, and submit a vendor response to a tender using the system, vendors need to be registered as a UNOPS vendor at the UNGM portal and be logged into UNGM. For guidance on how to register on UNGM and submit responses to UNOPS tenders in the UNOPS eSourcing system, please refer to the user guide and other resources available at: https://esourcing.unops.org/#/Help/Guides
This tender has been posted through the UNOPS eSourcing system. Cet avis a été publié au moyen du système eSourcing de l'UNOPS. Esta licitación ha sido publicada usando el sistema eSourcing de UNOPS.
| Link | Description | |
|---|---|---|
| https://esourcing.unops.org/#/Help/Guides | UNOPS eSourcing – Vendor guide and other system resources / Guide pour fournisseurs et autres ressources sur le système / Guía para proveedores y otros recursos sobre el sistema |
23291500
-
Industrial drilling tools
New clarification added: Dear Sir/Madam.Please let us know the required size of Indexable tools holder Small or medium or large and also right sided or left sided.UNOPS Response:Size: LargeSide: One of each (One right sided and one left sided)
Edited on:
17-Jul-2018 16:19
Edited by:
webservice@unops.org
New clarification added: I have clarification documents to be attached on item No. 6 submerged Arc Welders how do i go about this?UNOPS Response:Unfortunately, the system does not allow for attachments, it only allows for suppliers to paste their questions on the e-Sourcing platform.
Edited on:
17-Jul-2018 13:01
Edited by:
webservice@unops.org
New clarification added: Clarification for No. 6 Submerged Arc Welders Please clarify on the TIPS. How many consumables and what type. Line* Item nrItem name AWSU nit of measureSupplier Net weight in Kgm/UoM MoQ in Kgm/PCE1 0154623008 Contact tip 1.6MM A2/A6N / APCE WDC – BELGIUM0.13352 0154623006 Contact tip 2.5MM A2/A6N / APCE WDC – BELGIUM0.02353 0154623003 Contact tip 4.0MM A2/A6N / APCE WDC – BELGIUM0.02154 OK Autrod 12.10 1.6mm 30kg 5 1210252800 OK Autrod 12.10 2.5mm 30kgEL12KGM CDC – CZECH REPUBLIC30306 1210322800 OK Autrod 12.10 3.2mm 30kgEL12KGM CDC – CZECH REPUBLIC309007 1071800P0W OK Flux 10.71 25kg(55lb) BP 2GN / AKGM CDC – CZECH REPUBLIC251000 1. Solid wire ER70S-6 , 1.2mm 2321M12540HWeld 70S-6 1.2mm 15kg KGM1.00 UNOPS Response:See the answer to the response above under Clarification for No. 6 Submerged Arc Welders
Edited on:
17-Jul-2018 12:37
Edited by:
webservice@unops.org
New clarification added: Item No. 6: Submerged Arc Welders How much of the consumables wire + FluxContact Tips (which sizes)UNOPS Response:Copper-coated, unalloyed wire for Submerged Arc Welding. For low requirements or in combination with high Si and Mn alloying fluxes. Suitable for non- and low alloyed steels.Part number: OK AUTROD 12.105mm 100kg2.5 mm 30kg4 mm 100kg3.2 mm 100kgTypical weld metal analysis %Mn 0.52 %C 0.07 %Si 0.08%
Edited on:
17-Jul-2018 12:23
Edited by:
webservice@unops.org
New clarification added: Tig welders Standard Accessories TIG welding torch : 6M Earth cable : 3M + designated Earth clamp Stun electrodes Teng : ¢ 4mm 2ea Call Rotaract Body: 2 ea Collect Chuck: ¢ 2.4mm 2ea The ceramic nozzles : 2ea Argon gauge ( gas hose 2.5m) Ar gas cylinder (20Kg): 1 bottle - (One has not make a deposit for the cylinder and it has to be refilled) Manual with english l 1set, UNOPS Response:STANDARD ACCESSORIESAll purchased equipment’s are delivered with standard accessories and therefore let the vendor understand that this equipment’s must those accessories to be acceptedMIG WELDERMgnum® PRO 175L Gun, 10 ft. (3.0 m) (K4076-1)120V and 230V Input CablesWork Cable and ClampElectrode Holder and Lead AssemblyAdjustable Gas Regulator and HoseGas and Gasless NozzlesGun Cable Liner (pre-installed in gun)Spindle AdapterSample 1 lb (0.45 kg) Spool of SuperArc® L-56® Mild Steel MIG WireSample 0.5 lb (0.22 kg) Spool Innershield® NR®-211-MP Flux-Cored Wire0.025 in. (0.6 mm) and 0.035 in. (0.9 mm) Contact Tips0.025 - 0.030 in. (0.6 - 0.8 mm) and 0.035 in. (0.9 mm) Drive Rolls0.030 - 0.045 in. (0.8 - 1.1 mm) Knurled Drive Rolls0.025 - 0.035 in. (0.6 - 0.9 mm) and 0.045 in. (1.1 mm) Wire Guides
Edited on:
17-Jul-2018 12:14
Edited by:
webservice@unops.org
New clarification added: Torch Set 10m Earth cable 3m Plasma tips / electrode each 4 ea- (4 are not enough) Plasma Shield Cap / guide ring each 4ea Manual with English l 1set,UNOPS Response:MIG TORCH SETMODELE 300WAMPS 260AAir cooled60% duty cycleGas type: mixed gas Ar/CO210 m longWeight 9.2 kgPlasma Cutting TorchThe 1Torch™ RPT torch is the first plasma cutting torch that performs with virtually all plasma cutting power supplies. The 1Torch works with high frequency start systems, CD start systems, touch start systems and moving parts (blow back) start systems. Install the 1Torch on your current plasma power supply and you immediately benefit from the latest in high performance torch technology available today. Look for the Thermal Dynamics mark on your plasma consumable parts for genuine Thermal Dynamics consumables.FeaturesIts unique design allows the 1Torch the ability to work with high frequency, touch, CD, and moving parts (blow back) start systems.Plasma Cutting guide kitsThe deluxe guide kit can be used for straight line, circular (45 to 1050 mm) or bevel plate edge preparations. Position using pin on rivot mark, magnet or suction cup. The same kit can be used for torches PT 17, 23, 25, 27, 31XL, 32EH, 34 and 38. A basic kit for plasma cutting torches PT 17, 23, 25, 27, 31XL, 32EH, 34 and 38 with circular guide (45 to 750 mm) using pin on rivot mark is also available.Must provide manufacturers SOP manual English version 1set
Edited on:
17-Jul-2018 12:06
Edited by:
webservice@unops.org
New clarification added: Plasma Cutter - what thickness to cut?TIG welder, are they welding aluminium, how many amps, 200A - or more?MIG welder - what amps?Spot Welder - what amps?UNOPS Response:PLASMA CUTTER CUT CAPACITYCUT CAPACITY | SPEED (MILD STEEL)Maximum Pierce Capacity3/4” (19mm)1/4” in. (6.35 mm)148 ipm1/2” in. (12.7 mm)52 ipm3/4” in. (19 mm)26 ipmTIG WELDERInput Power200-600/1/3/50/60Rated Output3 Phase:330A/40%300A/60%1 Phase:240A/40%225A/60%Input Current3 Phase:60% Duty Cycle: 29/26/15/12/1040% Duty Cycle 27/24/14/11/91 Phase:60% Duty Cycle: 34/31/NA/NA/NA40% Duty Cycle: 32/29/NA/NA/NAOutput Range3 Phase: 2-375A1 Phase: 2-250ADimensions (H x W x D)21 in x 11.8 in x 25.5 in (533 mm x 300 mm x 648 mm)AC WAVE SHAPE CONTROLSAC FREQUENCY40-400 HzA lower frequency results in a wider bead.A higher frequency results in a more focused bead. AC BALANCE CONTROL35-99% (EN%)A lower AC Balance (EN%) results in an arc with increased cleaning action.A higher AC Balance (EN%) results in an arc with higher penetration. ELECTRODE POSITIVE (EP) AND NEGATIVE OFFSET (EN)2-375 Amps EP2-375 Amps ENA higher Electrode Positive (EP) current value results in intensified cleaning action.A higher Electrode Negative (EN) current value results in intensified penetration. PULSE FUNCTIONSAC PULSE FREQUENCY0.1-25% of AC output frequencysetting in pulses per secondDC PULSE FREQUENCY0.1-2,000 pulses per secondAlternating the current between peak and background helps better manage heat input and minimize material distortion.Provides for better arc control and faster freezing for uphill welding.Helps moderate filler metal deposition at low pulse frequencies (less than 10 pulses per second). AC WAVE FORMSSOFT SQUAREIncreased puddle controlSINEA soft sounding arcSQUAREFaster travel speedsTRIANGULARReduced heat input on thinner materials. Also provides for better cleaning on anodized applications MIG WELDERInput Power 115/230/1/60 Rated Output 120V: 100A/19.0/40% 230V: 200A/24V/25% Input Current 15A 14.7A Output Range 120V: 20-140 Amps DC, Max. OCV: 56 230V: 20-220 Amps DC, Max. OCV: 56 Cored Wire Size Range .035 - .045 in (0.9 - 1.2 mm) Wire Feed Speed Range 50-500 ipm (1.3-12.7 m/min) Dimensions (H x W x D) 14 in x 10.75 in x 19 in (356 mm x 273 mm x 483 mm)Net Weight 40.00 (18.14 kg) SPOT WELDER
Edited on:
17-Jul-2018 11:58
Edited by:
webservice@unops.org
New clarification added: Dear UNOPS,Kindly advise the specifications required for each item.ThanksKindly see responses to the below questions.
Edited on:
16-Jul-2018 16:15
Edited by:
webservice@unops.org
New amendment added #2: The bid deadline has been extended from Tuesday 17th July 2018 to Tuesday 24th July 2018.
Edited on:
16-Jul-2018 10:10
Edited by:
webservice@unops.org
New amendment added #1: The bid deadline has been extended from Thursday 12th July 2018 to Tuesday 17th July 2018.
Edited on:
11-Jul-2018 09:04
Edited by:
webservice@unops.org